Home / Services / Landscape and green waste / Shed demolition
Shed demolition: taking it apart piece by piece
A shed too rotted, rusted or cracked to move in one piece gets taken down where it stands: roof first, then walls, then the floor, and every piece goes on the truck.
Book online, and we will give you a call shortly.

When a shed needs demolition, not just removal
Shed demolition is the job for a shed that cannot leave in one piece. If the floor is rotted, the walls are racked or the metal panels have rusted through, we take it apart where it stands. If your shed is sound and you mainly want it and everything inside it gone, start with shed removal instead.
Every teardown follows the same order. We clear anything left inside, strip the roofing and roof panels, pull the trim and doors, take the walls down section by section, and finish with the floor and the skids or blocks under it. Long pieces get cut to fit the truck. A crew of two handles most sheds with hand tools; a big barn-style shed may bring the heavy-duty setup, a skid loader and a mini excavator.
Get it gone
Send photos of the shed inside and out. We confirm the price, take it down and haul every piece.
How different sheds come down

- Wood sheds: roofing stripped, walls cut into panels, floor joists pulled
- Metal sheds: panels unbolted, frame broken down and bundled for scrap
- Resin and plastic sheds: panels unclipped and stacked
- Lean-tos, potting sheds and carports built against a fence
- The concrete pad underneath, if you want it gone, priced by weight
Before we come
- Empty the shed, or tell us when you book that we are clearing the contents too.
- Pull out paint, fuel, pool chemicals and garden sprays. We'll haul anything but paint and solvents, fuel and oil, chemicals and pesticides, propane tanks, asbestos, medical waste and ammunition; we tell you where those go instead.
- Have an electrician disconnect any wiring to the shed. We do not do electrical work.
- Decide whether the concrete pad or the gravel under the shed stays.
- Send photos of all four sides and the inside to (888) 450-4097.
Placer County residents can drop household hazardous waste free at WPWMA, 3195 Athens Ave, Lincoln, daily 8 to 5.
As read 4 September 2026. Residents of other counties: check your own county's drop-off.
Where the pieces go
A torn-down shed is sorted like any other load, in the order Donate. Recycle. Dump. Metal sheds, hinges, screws and brackets go to scrap metal recycling. Usable tools and shelving from inside can go to donation. Wood, resin panels and roofing that cannot be recycled go to a transfer station or landfill.
What shed demolition costs
Shed demolition is priced by how much space the torn-down shed takes on the truck, with the teardown labor included. For scale, a tool shed is listed at about 120 cubic feet of truck space; a larger shed with its contents can run to half-truck price: to confirm or full-truck price: to confirm. Roofing and a concrete pad are dense and priced by weight on site.
We confirm a straight price before the first panel comes off. Book online, and we will give you a call shortly. See shed demolition and removal cost, light demolition and teardown and the calculator.
Other teardown jobs
Questions people ask
What is the difference between shed demolition and shed removal?
Removal takes a shed and its contents away, often with less teardown. Demolition is for a shed that has to come apart where it stands because it is too far gone to move whole. See shed removal if yours is still sound.
Do you take the concrete pad?
If you want it gone, yes. Concrete is a dense load priced by weight on site. If a new shed is going on the same spot, you may want to keep it.
Can you tear down a shed with things still inside?
Yes. We clear and sort the contents first, then take the shed down. Paint, fuel and chemicals have to come out beforehand, and you handle those.
Does the shed need to be disconnected from power?
Yes, if it is wired. Have an electrician disconnect it first; we do not do electrical work.
